CNC refers to computerized numerical control and CAM refers to computer aided manufacturing. In both cases, computers play an integrated part of the control system and are highly automated. CNC Cam software refers to the use of software for controlling machine tools used for manufacturing workpieces. While CNC cam software, free download is available, you need the best CNC programming software.

Camera

​​Windows USB Drivers

• Download Windows USB Drivers
  
  • ​open after downloaded to install
    

​
Windows Software

1. After selecting your camera model, click the “Download” button. Download (Windows) Download (Mac) Usage instructions (camera settings, etc.) are here. Setup procedure. Move the downloaded file to a folder of your choice. Double-click the file. Restart the PC after installing the application.
2. Live Video Made Better. ManyCam is the go-to software to enhance your live video on streaming platform, video conferencing app and distant classes. Add multiple cameras and video sources, such as mobile and PowerPoint, use virtual backgrounds, create layers and presets, screencast desktop, and more.
3. Apple® Mac OS X® version 10.5, 10.6, or 10.7. Note: Versions 10.6 and 10.7 are not supported in 64-bit kernel mode. If your computer uses the 64-bit kernel by default, you can start up with the 32-bit kernel by holding down the 3 and 2 keys during startup.

• Download Software for Windows (v.3.2.5)
  
  • ​open after download to install
    
  • on new Software features
    
• Standalone and Wireless Camera Base mode software file
  
  • ​Save this file to your SD card
    
  • Only used for SD card stand alone mode or wireless base
    

Device Firmware

• Camera Firmware (4.6.0)
  • ​Save to computer to update firmware via the software
    
  • or save to SD card, power off camera, insert SD card and power up camera to update firmware
    
• Camera Firmware (zip version)
  • ​Must be extracted then saved to computer or SD card
    
• Echo Firmware (2.3.0)
  
  • ​save to computer update via software
    
• Feeder Firmware (2.3.0)
  
  • ​save to computer update via software
    
• Activator Firmware (2.3.0)
  
  • ​save to computer update via software
    

​
MAC BuckEye Cam Software and Firmware:

• Download MAC Software
  
• Stand Alone Mode' Documentation
  
• 'Stand Alone Mode Software'
  
  • Download then copy file to your sd card
    
    

Linux BuckEye Cam Software for PCs

• SE Documentation
  

Nzxt Cam

X Series BuckEye Cam Cellbase

• Download USB Firmware Updater
  

​X Series BuckEye Cam Netbase

X Series MultiBase SE ARMv4 (software floating point)

Free Cam Software

X Series MultiBase SE ARMv7 (hardware floating point)

• Download ARMv4 with hardware floating point
  

Restore Card Generator
(Requires 2Gig SD card or smaller)

1. Select Windows or MAC Program version below
2. Download MAC Version
   
3. After download 'Double Click' program to run
4. Insert 2Gig SD card or smaller into computer
5. Follow software instructions to generate restore card​
   
6. Once card is generated take SD card to Camera
   
7. Remove power from Camera
   
8. Insert SD card into Camera
   
9. Power Camera back up
   
10. Display should show programming progress - DO NOT REMOVE POWER during the programming
11. Once 'Done' is displayed on Camera, remove SD card and remove power from Camera
    
12. Power Up Camera normally
    ​
    

Purchase Preloaded Restore SD Here and we will ship it to you)

​​List of software and firmware changes